76 lines
2.0 KiB
C++
76 lines
2.0 KiB
C++
// --------------------------------------
|
|
// i2c_scanner
|
|
//
|
|
// Version 1
|
|
// This program (or code that looks like it)
|
|
// can be found in many places.
|
|
// For example on the Arduino.cc forum.
|
|
// The original author is not known.
|
|
// Version 2, Juni 2012, Using Arduino 1.0.1
|
|
// Adapted to be as simple as possible by Arduino.cc user Krodal
|
|
// Version 3, Feb 26 2013
|
|
// V3 by louarnold
|
|
// Version 4, March 3, 2013, Using Arduino 1.0.3
|
|
// by Arduino.cc user Krodal.
|
|
// Changes by louarnold removed.
|
|
// Scanning addresses changed from 0...127 to 1...119,
|
|
// according to the i2c scanner by Nick Gammon
|
|
// https://www.gammon.com.au/forum/?id=10896
|
|
// Version 5, March 28, 2013
|
|
// As version 4, but address scans now to 127.
|
|
// A sensor seems to use address 120.
|
|
// Version 6, November 27, 2015.
|
|
// Added waiting for the Leonardo serial communication.
|
|
//
|
|
//
|
|
// This sketch tests the standard 7-bit addresses
|
|
// Devices with higher bit address might not be seen properly.
|
|
//
|
|
|
|
#include <Wire.h>
|
|
|
|
void setup() {
|
|
Wire.begin();
|
|
|
|
Serial.begin(9600);
|
|
while (!Serial); // Leonardo: wait for Serial Monitor
|
|
Serial.println("\nI2C Scanner");
|
|
}
|
|
|
|
void loop() {
|
|
int nDevices = 0;
|
|
|
|
Serial.println("Scanning...");
|
|
|
|
for (byte address = 1; address < 127; ++address) {
|
|
// The i2c_scanner uses the return value of
|
|
// the Wire.endTransmission to see if
|
|
// a device did acknowledge to the address.
|
|
Wire.beginTransmission(address);
|
|
byte error = Wire.endTransmission();
|
|
|
|
if (error == 0) {
|
|
Serial.print("I2C device found at address 0x");
|
|
if (address < 16) {
|
|
Serial.print("0");
|
|
}
|
|
Serial.print(address, HEX);
|
|
Serial.println(" !");
|
|
|
|
++nDevices;
|
|
} else if (error == 4) {
|
|
Serial.print("Unknown error at address 0x");
|
|
if (address < 16) {
|
|
Serial.print("0");
|
|
}
|
|
Serial.println(address, HEX);
|
|
}
|
|
}
|
|
if (nDevices == 0) {
|
|
Serial.println("No I2C devices found\n");
|
|
} else {
|
|
Serial.println("done\n");
|
|
}
|
|
delay(5000); // Wait 5 seconds for next scan
|
|
}
|